Product Presentation

ZXQ-2Q automatic metallographic prototype (pneumatic), suitable for small, not easy to hold or irregular metallographic and lithographic specimens, so as to cut the cutting or grinding and polishing, and then metallographic, spectral detection or hardness test. In the process of sample preparation, the machine through the program control, its automatic heating, pressure, automatic cooling to automatic pressure discharge stop a series of actions, to achieve the mechanism sample can be unattended effect, reflecting the machine more humanized, simple operation, superb efficiency of the superior characteristics.

ZXQ-2Q automatic metallographic inlay machine is the ideal sampling equipment for colleges and universities, industrial and mining enterprises.

The machine can work reliably under the following conditions:

1. The altitude is not higher than 1000m.

2. The surrounding medium temperature shall not be higher than + 40℃ and not less than-10℃.

3. The air relative humidity is not greater than 85% (at 20℃).

4. There is no conductive dust, explosive gas, and corrosive gases that seriously damage metals and insulators.

5. No obvious vibrations and bumps.

6. Gas source pressure is 0.6-0.8mpa

Technical Specifications

Specification Of Sample Pressing: φ 30mm, φ45mm (one when ordering)

Heater: 220v / 50Hz / 400w Temperature control (smart) Room temperature-250℃ adjustable

Air Source Pressure: 0.7-0.8mpa

Overall Dimension: 320350400mm

Weight: net weight 20kg, gross weight 30kg

Accessory Box Standard

Host: one unit

Power Cord: one root

Embedding Material：one pack (500g)

Technical Documents: manual, certificate, warranty card -one of each

Actual configuration may vary based on custom requirements.